Whenever a material is loaded within elastic limit, stress is __________ strain. Strength of Materials

  • equal to
  • directly proportional to
  • inversely proportional to
  • All of above
Answer: directly proportional to
1798 students attemted this question.

Explanation

No Explanation Available.

Share this question with friends

Similar Questions

  1. The stress induced in a body, when suddenly loaded, is __________ the stress induced when the same load is applied gradually.

  2. A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be

  3. The energy stored in a body when strained within elastic limit is known as

  4. The strain energy stored in a solid circular shaft subjected to shear stress (τ) is (where C = Modulus of rigidity for the shaft material)

  5. A thin cylindrical shell of diameter (d) and thickness (t) is subjected to an internal pressure (p). The ratio of longitudinal strain to volumetric strain is

  6. When a body is subjected to two equal and opposite pushes, as a result of which the body tends to reduce its length, the stress and strain induced is compressive.

  7. When a rectangular beam is loaded transversely, the maximum compressive stress is developed on the

  8. In order to prevent crushing of masonry at the base of the dam, the maximum stress should be __________ the permissible stress of the soil.

  9. The maximum diameter of the hole that can be punched from a plate of maximum shear stress 1/4th of its maximum crushing stress of punch, is equal to (where t = Thickness of the plate)

  10. The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.

  11. The stress at which the extension of the material takes place more quickly as compared to the increase in load, is called

  12. Strain energy is the

  13. Strain rosettes are used to

  14. The simply supported beam 'A' of length l carries a central point load W. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is W. The ratio of maximum deflections between beams A and B is

  15. The bending stress in a beam is __________ section modulus.

  16. The limit of eccentricity is based upon no tension condition.

  17. The neutral axis of the cross-section a beam is that axis at which the bending stress is

  18. A thick cylindrical shell having ro and ri as outer and inner radii, is subjected to an internal pressure (p). The maximum tangential stress at the inner surface of the shell is

  19. The torque transmitted by a solid shaft of diameter (D) is (where τ = Maximum allowable shear stress)

  20. The maximum stress produced in a bar of tapering section is at

Comments

Add Your Review

Your email address will not be published.

Subscribe to Newsletter!

Subscribe to get latest updates and information.