Priming of a centrifugal pump is done to Fluid Mechanics
Answer: Avoid chances of separation inside the impeller
No Explanation Available.
Share this question with friends
A centrifugal pump is used to pump water through a horizontal distance of 150 m, and then raised to an overhead tank 10 m above. The pipe is smooth with an I.D of 50 mm. What head (m of water) must the pump generate at its exit (E) to deliver water at a flow rate of 0.001 m³/s? The Fanning friction factor, f is 0.0062.
Cavitation in a centrifugal pump can be avoided by keeping the
Cavitation in a centrifugal pump results from
While starting a centrifugal pump, its delivery valve should be kept
Liquid delivery by centrifugal pump starts, only when the head developed by it is equal to the __________ head.
Boiler feed water pump is usually a __________ pump.
With increase in molecular weight of the gas, the head developed by a centrifugal compressor will
Reciprocating pumps compared to centrifugal pumps
__________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm².
A hydraulic ram acts as a/an __________ pump.
While starting an axial flow pump, its delivery valve should be kept
Which of the following is the most common pump for pumping either raw sewage or sludge?
Purpose of relief valve in a reciprocating pump is to
Function of air vessel provided in a reciprocating pump is to