Function of air vessel provided in a reciprocating pump is to Fluid Mechanics

  • Reduce discharge fluctuation
  • Reduce the danger of cavitation
  • Avoid the necessity of priming
  • Increase the pump efficiency
Answer: Reduce discharge fluctuation
1128 students attemted this question.


No Explanation Available.

Share this question with friends

Similar Questions

  1. A centrifugal pump is used to pump water through a horizontal distance of 150 m, and then raised to an overhead tank 10 m above. The pipe is smooth with an I.D of 50 mm. What head (m of water) must the pump generate at its exit (E) to deliver water at a flow rate of 0.001 m³/s? The Fanning friction factor, f is 0.0062.

  2. Purpose of relief valve in a reciprocating pump is to

  3. Boiler feed water pump is usually a __________ pump.

  4. Reciprocating pumps compared to centrifugal pumps

  5. The vessels shown above all contain water to the same height. Rank them according to the pressure exerted by the water on the vessel bottoms, least to greatest.

  6. The shape of an airplane wing causes the air above the wing to travel slower than the air below the wing.

  7. What is the force required (in Newtons) to hold a spherical balloon stationary in water at a depth of H from the air-water iterface? The balloon is of radius 0.1 m and is filled with air.

  8. Priming of a centrifugal pump is done to

  9. __________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm².

  10. A hydraulic ram acts as a/an __________ pump.

  11. Cavitation in a centrifugal pump can be avoided by keeping the

  12. Cavitation in a centrifugal pump results from

  13. While starting a centrifugal pump, its delivery valve should be kept

  14. While starting an axial flow pump, its delivery valve should be kept

  15. Which of the following is the most common pump for pumping either raw sewage or sludge?

  16. Liquid delivery by centrifugal pump starts, only when the head developed by it is equal to the __________ head.

  17. Interstage coolers are provided in a multistage compressor to

  18. Air pressure and altitude have what type of relationship?

  19. If you blow air between these two balloons, the pressure between the balloons would_________.

  20. If a helium balloon hoovers in the air, what do we know about the buoyant force acting on the balloon?


Add Your Review

Your email address will not be published.

Subscribe to Newsletter!

Subscribe to get latest updates and information.