Following are some of the multiple choice questions on the Computational fluid dynamics with answers that will help the students in developing their knowledge.
Computational fluid dynamics MCQ
1. Which of the following is an example of thinking computationally?
2. According to equation of continuity, A1V1 = A2V2 = constant. The constant is equal to:
3. What do we mean by COMPUTATIONAL THINKING?
4. In fluid dynamics, which of the following fundamental expressions links pressure to the fluid's speed and height?
5. If the discharge is constant, what type of flow does it has?
6. The rate at which fluid flows through a closed pipe can be determined by
7. A flow that travels along and collides, resulting to change in flow direction.
8. What is TRUE about Fluid Dynamics?
9. Velocity of fluid increases where the pressure is:
10. When weight of an object falling freely becomes equal to the drag force, then the body will move with:
11. The dimensions of coefficient of viscosity is:
12. When designing a building that must be accessible for wheelchairs, which of the following characteristics is non-essential?
13. One advantage of abstraction is that it means no mistakes can be made
14. Which of the following is not done by decomposition?
15. When drawing a dog, which of the following characteristics is non-essential?
16. Which of the following is not done by abstraction?
17. What does abstraction do?
18. What does decomposition mean?
19. What is computational thinking?
21. Concepts under Fluid Dynamics
22. _______________________ is an idea of fluid dynamics. It says that as speed of the fluid increases, pressure decreases. ... For a steady flow, the amount of fluid entering the pipe must equal the amount leaving the pipe, so the fluid speed in the thin part must increase.
24. If cross-sectional area of pipe decreases, the speed of fluid must increase according to:
25. If radius of droplet becomes half then its terminal velocity will be:
26. As the water falls from tap, its speed increases and cross sectional area:
27. Blood has density equal to that of:
28. When the body reaches its terminal velocity, the acceleration of the body becomes
29. One Torr is expressed in ππβ2 as:
30. The maximum constant velocity of an object falling vertically downward is called:
31. The equation πΉ = 6ππππ£ is called:
32. An object moving through a fluid experience a retarding force called:
33. Speed of efflux can be determined by applying:
34. A man standing near a fast moving train may fall.
35. Branch of applied science that describes the movement of liquid and gases.
36. It states that, "in the case of steady flow, the amount of fluid flowing past one point must be the same as the amount of fluid flowing past another point, or the mass flow rate is constant."
37. It states that, "as the speed of a fluid increases, there is a simultaneous decrease in the pressure of a fluid and a decrease in it's potential energy.
38. BONUS ROUNDIt is the sub-part of Fluid Mechanics that studies the flow of Fluid
39. Both Laminar flow and Turbulent flow occur inside or outside an object.
40. BONUS ROUNDIt is the branch of science that covers the behavior of fluids in a state of motion or rest.
42. Bernoulliβs equation is obtained by applying law of conservation of.
43. Venturi meter is a device used to measure:
44. The study of properties of fluids in motion is called
45. Abstraction and Decomposition are separate concepts, you would usually choose to do either one or the other
46. You could use abstraction to replace specific objects with simple shapes
47. This is a good example of decompositionSit downDo homework
48. Decomposition allows each task to become _______
49. Decomposition allows the entire task to be completed as _____
50. It is always necessary to decompose a task
Enjoyed the Quiz. Share this with friends
